Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops.  

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″