Ideal for bridge clubs, homeowners, country clubs, hotels and the rental market. Tested at 1000 lbs capacity.

Tops:

Plywood Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge 

• Molding is a black flat vinyl “T” edge. Available on high pressure laminate tops and plywood tops.

Crimped Aluminum Edge 

• Molding is high-pressure crimped to the top. Available on high pressure laminate tops, plywood tops, and mayfoam tops.

Understructure:

• All steel construction, legs are 1” square 20 gauge tubing.
• Legs lock automatically in the open position with simple release tabs for folding.
• All metal parts are powder coated. 

Table Height 

• Standard: 29″

Ideal for bridge clubs, homeowners, country clubs, hotels and the rental market. Tested at 1000 lbs capacity.

Tops:

Plywood Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge 

• Molding is a black flat vinyl “T” edge. Available on high pressure laminate tops and plywood tops.

Crimped Aluminum Edge 

• Molding is high-pressure crimped to the top. Available on high pressure laminate tops, plywood tops, and mayfoam tops.

Understructure:

• All steel construction, legs are 1” square 20 gauge tubing.
• Legs lock automatically in the open position with simple release tabs for folding.
• All metal parts are powder coated. 

Table Height 

• Standard: 29″

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

Plywood Core 5/8″ thick plywood, sanded smooth without voids or patches. 
High Pressure Laminate Tops Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed.

Edging:

Vinyl Flush Edge

• Molding is a black flat vinyl “T” edge.

Understructure:

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 29″
• 30″ available upon request

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops.  

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops.  

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″