Plywood Folding Tables – Buy American Tables 877-422-3876

Maywood Charging Tables 30X72X42 Deluxe Charging

Sat, 21 Aug 2021 19:05:01 +0000

Maywood Charging Tables 30X72X42 Deluxe Charging

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside.

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 30X72X30 Deluxe Charging

Sat, 21 Aug 2021 19:04:42 +0000

Maywood Charging Tables 30X72X30 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X96X42 Deluxe Charging

Sat, 21 Aug 2021 19:04:21 +0000

Maywood Charging Tables 24X96X42 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X96X30 Deluxe Charging

Sat, 21 Aug 2021 19:03:54 +0000

Maywood Charging Tables 24X96X30 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X72X42 Deluxe Charging

Sat, 21 Aug 2021 19:03:33 +0000

Maywood Charging Tables 24X72X30 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X72X30 Deluxe Charging

Sat, 21 Aug 2021 19:03:12 +0000

Maywood Charging Tables 24X72X30 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X60X42 Deluxe Charging

Sat, 21 Aug 2021 19:02:51 +0000

Maywood Charging Tables 24X60X42 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 24X60X30 Deluxe Charging

Sat, 21 Aug 2021 19:02:25 +0000

Maywood Charging Tables 24X60X30 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Charging Tables 18X72X42 Deluxe Charging

Sat, 21 Aug 2021 19:02:05 +0000

Maywood Charging Tables 18X72X42 Deluxe Charging

Tops:

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables.

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables.

Understructure:

Stationary Charging

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coating.
14 gauge steel mounting brackets are welded to top of legs.
Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

Four leg configuration with legs positioned in corners.
Leg material: 1 1/8″ square, 16 gauge steel tubing.
Glides: black plastic pressed into ends of legs.
Finish: black or silver powder coated.
Legs are folded together in pairs.
Locks into position with a spring steel lock.
An activating rod releases the locks.
Legs are retained in folded position by spring tension.

Aprons

Size: 3″ high x 7/64″ wide
Material: aluminum alloy.
Fastened to underside perimeter of top with long sheet metal screws.
Finish: black powder coating.

Table Height

Standard: 30″ or 42”

Wireless Charger Base

Die cast aluminum base and mounting plate
Column is bright chrome plated steel
Table base assembles by a tapered fit between the column, base and mounting plate.
Glides: chrome steel pressed into end of leg.

]]>

Maywood Standard Plywood Top 60″ Round

Sat, 21 Aug 2021 18:59:07 +0000

The Maywood Standard Series Plywood Top with Aluminum Flush

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain.

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops

Understructure:

Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
All metal parts are powder coated.
Continuous weld joints.
Glides: black plastic, pressed into end of leg.
Hinged diagonal brace allows legs to fold.
Locks positively in opened and closed positions.
Secured to top with flush flat head carriage bolts, lock washers and nuts.
Finish: silver powder coated
Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights

Standard: 30″
Children’s: 22″

Riser Height

Standard: 12″

]]>