Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. 

Charging Units Two charging units complete with two power outlets and two USB ports. Available on Stationary and Deluxe Charging tables.

The AirCharge is a wireless charging solution that provides power to any Qi compatible smartphone or device. An adaptor is available for devices without Qi capabilities. Available on Pedestal Charging tables only. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on Stationary, Deluxe and Pedestal Charging tables. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available only on Pedestal Charging tables. 

Understructure:

Stationary Charging

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coating.
• 14 gauge steel mounting brackets are welded to top of legs.
• Legs are bolted to aprons with four carriage bolts.

Deluxe Charging Tables

• Four leg configuration with legs positioned in corners.
• Leg material: 1 1/8″ square, 16 gauge steel tubing.
• Glides: black plastic pressed into ends of legs.
• Finish: black or silver powder coated.
• Legs are folded together in pairs.
• Locks into position with a spring steel lock.
• An activating rod releases the locks.
• Legs are retained in folded position by spring tension.

Aprons

• Size: 3″ high x 7/64″ wide
• Material: aluminum alloy.
• Fastened to underside perimeter of top with long sheet metal screws.
• Finish: black powder coating.

Table Height

• Standard: 30″ or 42”

Wireless Charger Base

• Die cast aluminum base and mounting plate
• Column is bright chrome plated steel
• Table base assembles by a tapered fit between the column, base and mounting plate.
• Glides: chrome steel pressed into end of leg.

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective stain. Rectangular table tops are 3/8″ thick; all other table tops are 5/8″ thick. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any high pressure laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Aluminum Flush Edge Molding is secured to the top with 3/8″ diameter steel rivets. Available on 3/8″ rectangular plywood tops only. 
Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops with 5/8″ thickness. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all 5/8″ plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additional steel cross rails where needed.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, 42″and the 48″ diameter rounds all have individual single leg folding action
• Metal caps standard
• Folded thickness: Rectangular – 2 1/2″ Rounds – 2 7/8″