Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.

Tops

High Pressure Laminate Tops Plywood core: clearfaced plywood 5/8″ thick, sanded smooth, without voids or patches

Laminate: HPDL on top as well as a backer sheet on underside.

Edging:

Bumper “T” Molding 

• Molding is a black vinyl Bumper “T” edge.

  Understructure:

  • Leg material: 1-1/4″ round, 16 gauge cold rolled steel tubing.
  • Two vertical tubes are centered on a single steel tube cross piece with rubber feet at both ends.
  • Chassis is a 1-3/4″x1″ 14 gauge steel channel box section that completely surrounds the underside of the table.
  • Corners of the channel box section are constructed of .035″ thick cold rolled steel
  • Three 1-1/4″ pipe straps are attached over each leg on each side for extra support.
  • Chassis is attached to the top with screws.
  • An automatic gravity lock provides a positive locking mechanism. Rubber caps are wrapped around the the 1-1/4″ tubing.
  • Two vertical 1-1/4″ 16 gauge steel tubes are centered for maxiumum support.
  • All metal parts are black powder-coated.

  Option:

   Silver powder-coated. 

  Modesty Panel 

  • 8″ wide and covers overall length of the table.
  • Panel is constructed with a 5/8″ thick plywood core, HPDL on both sides.
  • Welded to the table chassis with spring loaded hinges that pivot.
  • Safety latch holds Modesty Panel in place when folded and being transported.

  Folded Thickness 

  • 3″

  Table Height 

  • Standard Height: 29″
  • 30″ available upon request at no extra charge.
  • 5ft (60″) only available at 29″ height.