Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Core Constructed of a 3/8″ lite-ply core with a .050 high-pressure laminate, any color available, surrounded by our unique crimped aluminum edge.

Edging:

Crimped Aluminum Edge

• Molding is high-pressure crimped to the top.

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additinal steel cross rails where needed.
• On rectangular tables metal stacking plates are secured to the ends of the rails.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, and the 42″ diameter rounds all have individual single leg folding action
• Metal glide caps standard
• Folded thickness: Rectangular – 2 1/2″, Rounds – 2 7/8″

Table Heights 

• Standard: 30″
• 29″ available at no extra charge

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective stain. Rectangular table tops are 3/8″ thick; all other table tops are 5/8″ thick. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any high pressure laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Aluminum Flush Edge Molding is secured to the top with 3/8″ diameter steel rivets. Available on 3/8″ rectangular plywood tops only. 
Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops with 5/8″ thickness. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all 5/8″ plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Legs made from 1 1/2″ square, 20 gauge steel tubing
• All metal parts are black powder coated.
• Chassis is a self-supporting unit welded and riveted throughout and consists of two longitudinal 1 3/4″ x 1″ x 1/8″ rerolled high carbon steel angles.
• Two (or three, depending on the model) additional steel cross rails where needed.
• A rectangular stretcher piece, 1 1/2″ x 4″, is welded between the legs near the top to provide maximum strength and rigidity.
• Leg assembly secured to the angle iron rails with 1/4″ steel rivets.
• Each of the four legs is individually braced with a 13 gauge steel elbow, riveted at one end to the leg and at the other to the angle iron rail.
• Each pair of elbow braces is joined by a locking bar, 2 3/4″ wide, 16 gauge, to insure they move in unison.
• An automatic lock insures that the elbow braces lock in the past center position.
• 30″ x 30″ and 36″ x 36″ squares and the 30″, 36″, 42″and the 48″ diameter rounds all have individual single leg folding action
• Metal caps standard
• Folded thickness: Rectangular – 2 1/2″ Rounds – 2 7/8″