Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 

Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops.  

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″

Tops:

Plywood Tops Clear faced plywood: 5/8″ thick, sanded smooth, without voids and patches, sealed on both sides with protective walnut stain. 
High Pressure Laminate Tops Plywood core: 5/8″ thick plywood, sanded smooth, without voids and patches. Laminate: .050 thick high pressure laminate on top as well as a .050 thick backer sheet on underside. Any laminate top over 60″ wide must be seamed. 
Mayfoam Tops Mayfoam tops are constructed of 5/8″ thick plywood, sanded smooth, without voids and patches. Rectangular table tops are 3/8″ thick. A 1/16″ expanded vinyl sheet is permanently bonded to the top. 

Edging:

Vinyl Flush Edge Molding is a black flat vinyl “T” edge. Available on all high pressure laminate tops and all plywood tops. 
Crimped Aluminum Edge Molding is high-pressure crimped to the top. Available on all plywood tops, all high pressure laminate tops, and all Mayfoam tops. 

Understructure:

• Wishbone shaped legs. The 18″ wide tops have “H” style legs, 24″ wide tops have a choice of wishbone or “H” style legs.
• Leg material: 1″ diameter, 16 gauge cold rolled steel tubing.
• All metal parts are powder coated.
• Continuous weld joints.
• Glides: black plastic, pressed into end of leg.
• Hinged diagonal brace allows legs to fold.
• Locks positively in opened and closed positions.
• Secured to top with flush flat head carriage bolts, lock washers and nuts.
• Finish: silver powder coated
• Full length wood runners attached with carriage bolts and nuts stiffen top and facilitate stacking.
• Folded thickenss: Rectangular – 2 1/16″ Rounds – 3 1/4″

Table Heights 

• Standard: 30″
• Children’s: 22″

Riser Height 

• Standard: 12″