3/4″ thick Plywood Core, with .080″ Premium High-Pressure Top and Masonite Backer Sheet
7/8″ total Top thickness
1″ 18ga. steel Pedestal Legs on Rectangular Tables
1 1/8″ 14ga. steel Wishbone Legs on Round and Oval Tables
1 5/8″, one-piece steel Apron
Mar-Proof Plastic Foot Caps & Edge Molding
Automatic Lock-Open Mechanism
12/30/15 RR
]]>
cp8/3/2020
]]>High-Pressure Top Folding Tables – 5/8″ Thick Core
*********** the CF 1872P was Discontinued and replaced with a slightly thicker core table ************
Replaced with the CF1872PX with 3/4 inch core. Same options, colors, etc
For Moderate to Heavy Duty Home, Office, Food Service & Commercial use. Weighs roughly 10% less than our 3/4″ High-Pressure Top Tables.
12/26/15 RR
]]>Melamine Top Folding Tables
Economical Choice for Light Duty Home, Office and Shop use.
bb 12/29/15
cp 8/10/20
]]>Correll Commercial Plastic Tamper Resistant Folding Tables – 18″x72″ Rectangle
Rx-Series Blow-Molded Tamper Resistant Folding Tables
Tamper Resistant Folding Tables for use in Prison and Correctional Facility Offices, Schools, and other adverse environments
One-Piece Blow Molded Plastic Tops are Waterproof, Chemical, Stain, Blood, & Impact Resistant. More durable than ABS at half the cost.
Legs are Welded & Riveted, with Non-Removable Foot Caps
Tops are attached to Steel Ladder Frame with Tamper-Proof Screws
5-Year Limited Warranty against Defects in Material & Workmanship
1/7/2020
]]>
Available in Walnut, Medium Oak, Fusion Maple, Dove Gray, Gray Granite and Black Granite. Optional Colors by quote.
Same Top construction as our 3/4″ High-Pressure Folding Tables, and ST-Series Seminar Tables, but with our classy new Panel Leg Design.
High-Pressure Laminate gives a hard, flat, writing surface.
Like our ST-Series, these tables have our unique Knife-
Lock Folding mechanism, which makes underneath the table completely open, with nothing to interfere with the user’s leg room. Legs are 1″x 2″ Steel with Nylon Glides.
12/23/15 RR
]]>Same Top construction as our 3/4″ High-Pressure Folding Tables, and ST-Series Seminar Tables, but with our classy new Panel Leg Design.
High-Pressure Laminate gives a hard, flat, writing surface.
Like our ST-Series, these tables have our unique Knife-
Lock Folding mechanism, which makes underneath the table completely open, with nothing to interfere with the user’s leg room. Legs are 1″x 2″ Steel with Nylon Glides.
1/8/20 RR
]]>
12/22/15 RR
]]>
For light weight, easy handling, heavy duty commercial use, where top will be exposed to Foods, Crayons, Markers, Paints, Chemicals, and other Stains.
• Light weight, waterproof, and virtually indestructible onepiece Blow-Molded Plastic Top.
• Colors go all the way through, will not wear or scratch off
• Strong Steel ”Ladder‘‘ Frame
• 1″, 18ga. steel Pedestal Legs on Rectangular Tables
• 1 1/8″ 18ga. Off-Set Legs on R1872 Seminar Table
• 1 1/8″, 14ga. steel Wishbone Legs on Round Tables
• Mar-Proof Plastic Foot Caps & Automatic Lock-Open Mechanism on all tables
• 30×60, 30×72, 30×96 and 60 Round Tables use 1 1/4″ Skirt Clips, or clips on page 9. Other sizes require “Stick-On” Velcro Tape or Spots.
cp8/4/20
]]>
Main frame constructed of U.S. steel rails and folding legs: rails are roll formed of 14 gauge steel, legs of 16 gauge 1” steel tubing and braces of 11 gauge stamped steel with 16 gauge gravity lock. Legs are permanently swaged into rails then attached to table top with bolt-through assembly.
Main frame constructed of U.S. steel rails and folding legs: rails are roll formed of 14 gauge steel, legs of 16 gauge 1” steel tubing and braces of 11 gauge stamped steel with 16 gauge gravity lock. Legs are permanently swaged into rails then attached to table top with bolt-through assembly.
Frame and tubing is industrial cleaned for rust resistance and superior paint adhesion. Baked on polyester powder coating has outstanding toughness, excellent weathering properties and a smooth appearance.
Blow molded table top of polyethylene plastic with color blended throughout. Formulated for outdoor exposure with minimal fade or thermal stress cracking (indoor storage recommended). Average thickness of material engineered to be .140”.
Excellent stacking performance, 15 high maximum is recommended. Edge of table is 7/8” thick to accept standard skirting clips. Round tables are made with two half circle pieces electronically bonded together. Top is attached to main frame with bolts and nylon nuts to provide extreme durability and ensure there is no separation during rough handling.
Glides are insert style flush mount standard. Nylon pad on glide for non-marring of floor surfaces. Rivets are ¼”, zinc plated to resist rust and powder coated for complete rust protection.
All Commercialite® tables have Gray tops and Black powder coat frame and legs.
Full 10 year limited warranty against manufacturing defects under normal use. McCourt Manufacturing will repair or replace (at our option) at no charge; customer assumes all freight charges.
]]>